Name: 4G Antenna Design | Dipole Antenna Design
Brand: C&T RF Antennas Inc
SKU: CTRF-ANTENNA-PCB-7027-XXXX-DESIGN

Description

Who Provides the 4G Antenna Design Dipole Antenna Design?

The 4G Antenna Design Dipole Antenna Design service is provided by C&T RF Antennas Inc., we provide the Omni dipole antenna design, directional dipole antenna design, etc.

What is 4G?

4G communication technology is the fourth-generation mobile information system, which is a better improvement than 3G technology. Compared to 3G communication technologies, it is a very advantage of WLAN technology and 3G communication technology.

A good combination allows the image to be transported faster so that the quality and image of the transfer image look clearer.

Applying 4G communication technology in a smart communication device allows the user’s Internet speed and speeds up to 100Mbps.

4G (fourth-generation mobile communication technology standard), is an extension of 3G. According to the definition of the International Telecommunication Union, a static transmission rate of 1 Gbps and a user’s ability to reach 100 Mbps in a high-speed mobile state can be used as a 4G technology.

LTE Advanced (Long Term Evolution Technology Upgrade): peak rate: 1Gbps downstream, 500Mbps upstream, is the first 4G standard recognized by the International Telecommunication Union and is in fact the only mainstream 4G standard.

WiMAX-Advanced (Global Interoperable Microwave Access Upgrade): Led by the WiMAX Forum, it can receive up to 300Mbps downlink and 300Mbps uplink, and up to 1Gbps at stationary fixed points.

TD LTE-Advanced: China’s new generation of mobile communication technology with independent intellectual property rights, with peak rates exceeding 1Gbps.

4G Antenna Design Dipole Antenna Design Specifications

Model: CTRF-ANTENNA-EM-7027-XXXX-DESIGN

Frequency: 698-960MHz, 1710-2700MHz

Material: PCB/FPC Trace Board

Size: depends on the terminal’s space and the performance need

Cable: RG coaxial cable

Connector: IPEX, U.FL, MHF, Opening end for solder

C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.

C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.

Please contact C&T RF Antennas Inc’s engineering team for the 4G antenna design dipole antenna design details such as 4G antenna design dipole antenna design time, 4G antenna design dipole antenna design engineering fee, 4G antenna design dipole antenna design technology support, etc.

Dipole Antenna Design Methods

For small antennas usually based on PCBs, there are many possible design methods. The most common is to adopt open wire (also called open) structures (such as dipole and monopole antennas), loop wire designs (such as loop antennas), and solid block designs.

The open antenna is actually a miniature version of the large antenna that has existed since the beginning of radio technology. In fact, because Heinrich Hertz used a dipole antenna in his 1888 experiment, it is sometimes called a Hertz antenna.

It is balanced with the ground plane. Before the emergence of cable and satellite TV, it has faithfully performed the duties of VHF TV rabbit ear antennas.

In contrast to dipoles, monopole antennas are single-ended to the ground, so a ground plane is required. In many wireless applications, monopole antennas are used as whip antennas. It is also known as the Marconi antenna, which was used in Marconi’s early experiments.

Below are the PCB 4G Antenna Design Dipole Antenna Design styles for your reference.

65x12mm PCB Antenna – – 4G Internal Antenna LTE PCB Trace Antenna

35x8mm PCB Antenna – – 4G Omni Directional Antenna PCB Antenna

40x40mm PCB Antenna – – Omni Directional 4G LTE Antenna PCB Antenna

34x8mm PCB Antenna – – Indoor LTE Omnidirectional Antenna 4G PCB Antenna

59x8mm PCB Antenna – – Internal PCB Router Antenna For 4G LTE Network

105x14mm (Green) PCB Antenna – – Green High Gain Internal Antenna 4G LTE PCB Antenna

105x14mm (Black) PCB Antenna – – 4G LTE High-gain Antenna Embedded PCB Antenna

95x13mm PCB Antenna – – High Gain 4G Antenna Indoor PCB Antenna

98x13mm PCB Antenna – – Good 4G LTE Antenna Internal PCB Antenna

75x22mm PCB Antenna – – PCBDipole Antenna Design Trace Antenna LTE 3G 4G Antenna

75x5mm PCB Antenna – – Best 4G LTE Indoor Antenna PCB Trace Antenna