High-performance GSM 4G Antenna LTE PCB Antenna

Description

What is a High-performance GSM 4G Antenna LTE PCB Antenna?

The High-performance GSM 4G Antenna LTE PCB Antenna CTRF-ANTENNA-PCB-7027-6017-IPEX comes with 4/6dBi Gain, PCB Board Materials, IPEX/UFL Connector, a 60x17mm FPC board size, RG 1.13 cable 100mm antenna extension LTE Antenna manufactured by C&T RF Antennas Inc for indoor applications.

The High-performance GSM 4G Antenna LTE PCB Antenna bulti-in antenna covers NB IoT, 2G, 3G, GSM, and 4G LTE full-band frequency 698-960MHz, 1710-2700MHz for IoT and M2M industries.

LTE wiki

LTE, that is, Long Term Evolution (Long Term Evolution Technology), although in the commercial publicity is usually called 4G LTE, in fact, is 3.5G under the HSDPA towards 4G transition version is not the real sense of the 4G, commonly known as 3.9G.

LTE is a long-term evolution of the UMTS (Universal Mobile Telecommunications System) technology standard developed by the 3GPP (The 3rd Generation Partnership Project) organization, which was formally established and launched at the 3GPP Toronto meeting in December 2004.

LTE system introduced OFDM (Orthogonal Frequency Division Multiplexing) and MIMO (Multi-Input & Multi-Output) and other key technologies, significantly increasing the spectral efficiency and data transmission rate (20M bandwidth 2X2MIMO in the case of 64QAM.

The theoretical downlink maximum transmission rate of 201Mbps, after removing the signaling overhead is about 150Mbps, but according to the actual network and terminal capacity, the maximum transmission rate is 201Mbps.

However, according to the actual network and terminal capacity limitations, the peak downlink rate is generally considered to be 100Mbps and the uplink rate is 50Mbps).

And supports multiple bandwidth allocations: 1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, and 20MHz, and supports the global mainstream 2G/3G bands and some new bands, so the spectrum allocation is more flexible and the system capacity and coverage are also significantly improved.

LTE system network architecture is flatter and simpler, reducing network nodes and system complexity, thus reducing system latency and network deployment and maintenance costs.

LTE system supports interoperability with other 3GPP systems. According to different duplexing methods, the LTE system is divided into FDD-LTE (Frequency Division Duplexing) and TDD-LTE (Time Division Duplexing), and the main difference between the two technologies lies in the physical layer of the null port (like frame structure, time division design, synchronization, etc.).

FDD system adopts paired frequency bands to receive and transmit data, while the TDD system uses the same frequency bands to transmit on different time slots, compared with FDD duplexing, TDD has higher spectrum utilization.

C&T RF Antennas Inc provides internal & external antennas with the 4G LTE antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, Wifi 2.4GHz, 5.8GHz, Cellular 2G 3G 4G LTE, GPS, 5G NR, etc.

C&T RF Antennas Inc provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.

The High-performance GSM 4G Antenna LTE PCB Antenna is available at C&T RF Antennas Inc, contact us for more details on the GSM 4G Antenna LTE PCB Antenna such as GSM 4G Antenna LTE PCB Antenna datasheet, GSM 4G Antenna LTE PCB Antenna pricing, GSM 4G Antenna LTE PCB Antenna inventory.

Or other GSM 4G Antenna LTE PCB Antenna types.

High-performance GSM 4G Antenna LTE PCB Antenna Specifications:

4G LTE PCB Antenna Features

RF Antenna Applications