Dual-Band 2.4 GHz 5GHz PCB Antenna

Description

Who Manufactures Dual-Band 2.4 GHz 5GHz PCB Antenna?

The Dual Band 2.4 GHz 5GHz PCB Antenna CTRF-ANTENNA-PCB-2458-5207-IPEX is manufactured by C&T RF Antennas Inc with a dual-band wifi antenna that is optimized to operate in both WiFi bands 2400MHz and 5800GHz.

The Dual-Band 2.4 GHz 5GHz PCB Antenna is an Omni dipole antenna that radiates RF (radio frequency) signals in both the 2.4GHz and 5GHz frequencies. The dual-band WiFi dipole antenna radiates and receives signals at a 360-degree angle around it.

What are 2.4 GHz and 5GHz dual bands?

The primary difference between 2.4 and 5GHz bands is the range (coverage) and the bandwidth (speed) that these bands provide. For instance, the 2.4GHz band offers coverage at a longer range; however, it transmits data at slower speeds. Instead, the 5GHz band gives less coverage but sends data at faster speeds.

How does the terminal select the wifi network?

The terminal will pick the most suitable route for access according to local rules. Then this rule contains.

1. Optimal power

In the terminal selection routing connection, the initial case is that the device selects the route with the highest power for the connection.

Power Optimal is the earliest AP association selection mechanism for Wi-Fi, where the terminal monitors the surrounding devices for a period of time and sets a threshold value.

If a higher power is detected, or the power of the currently associated AP drops to a certain threshold, then it is ready to switch.

2. Spectrum Navigation

Spectrum navigation is to prioritize the terminal and 5GHz routing for connection when the same network exists in 2.4GHz and 5GHz. This technology is basically said to operate at the terminal at present.

When the function of spectrum navigation is turned on at the terminal (this is a function that can be turned on or off manually in general terminals, such as Wi-Fi or cell phones).

So if the terminal turns on spectrum navigation and the route turns on dual-band unification, then the terminal is connected to the 5GHz network by default.

3. Fixed selection

The above two are dynamic switching methods. At present, some terminals actually support the equipment fixed binding an AP’s BSSID for the association. Unless the BSSID of this AP is no longer there, it will not switch.

C&T RF Antennas Inc supplies the single-band 2.4GHz PCB Wifi Antennas, single-band 5.8GHz PCB Wifi Antennas, dual-band PCB wifi antennas, flexible PCB wifi antennas with single-band and dual-band, etc.

The Dual-Band 2.4 GHz 5GHz PCB Antenna is available at C&T RF Antennas Inc. We provide the wifi antenna with many antenna types. Such as the Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, PCB Antennas, FPC Antennas, Spring Antennas, etc.

We provide telecommunication antennas with the antenna radio frequencies such as 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, Lora, VHF&UHF, NB-IoT, GSM, Wifi 2.4GHz, 5.8GHz, 2G 3G 4G LTE, GPS, 5G NR, UWB, etc.

Contact us for the Dual-Band 2.4 GHz 5GHz PCB Antenna datasheet, Dual Band 2.4 GHz 5GHz Wifi PCB Antenna pricing, and inventory on the Dual Band 2.4 GHz 5GHz Wifi PCB Antenna.

Dual-Band 2.4 GHz 5GHz PCB Antenna Specifications

Embedded PCB Antenna Features