SMA NB-IoT Antenna 3dBi Antenna

Description

What is an SMA NB-IoT Antenna 3dBi Antenna?

The SMA NB-IoT Antenna 3dBi Antenna CTRF-ANTENNA-AP-8221-13190-SMA is a rubber duck antenna straight SMA antenna with 868MHz, 915MHz, LTE, GSM, GPRS, 2G, 3G, NB-IoT antenna manufactured by C&T RF Antennas Inc.

The SMA NB-IoT Antenna 3dBi Antenna is for the Low Power Wide Area Network (LPWAN) radio technology standard to meet the demands and challenges of IoT devices and services.

What is the feature of NB-IoT?

First, wide coverage.

Compared to existing GSMs, broadband LTE enhancements are enhanced by 20dB, and the signal has a larger transport coverage (35km can be covered by the GSM base station), which can override the deep underground GSM network that cannot be overwritten.

The principle is mainly dependent on:

1. Reduce the bandwidth, and improve the power spectral density;

2. Repeat the transmission, and obtain the time diversity gain. Be

Second, large connectivity.

Compared to existing wireless technology, the same base station increases by 50-100 times the number of access to access, and each cell can reach a 50K connection, which is really a massive connection necessary for everything.

The principle is that:

1. Based on delay insensitive features, use traffic models, saving more access devices, switching between dormant and active states;

2. Higher utilization;

3. Reduce the empty port signaling interaction and enhance the spectral density. Be

Third, low power consumption.

Terminals are in sleeping states in 99% and integrated a variety of power-saving technologies, standby time for 10 years.

1, PSM low power mode, that is, adding the PSM state under the idle air, equivalent to the shutdown, causing the timer control, the energy consumption is lower;

2. EDRX expanded non-continuous receipt power saving mode, using a longer Paging cycle, EDRX is 1/16 of DRX power consumption. Be

Fourth, low cost.

Hardware can be tailored, the software is simplified to ensure the cost of NB-IOT is inexpensive, and the NB-IoT communication single module cost is less than $ 5.

C&T RF Antennas Inc is the NB-IoT internal antenna and NB-IoT external antenna company, the leading NB-IoT antenna manufacturer in China.

We provide the RF antennas with other antenna radio frequencies such as 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, Lora, VHF&UHF, NB-IoT, GSM, Wifi 2.4GHz, 5.8GHz, 2G 3G 4G LTE, GPS, 5G NR, UWB, etc.

C&T RF Antennas Inc provides the NB-IoT antenna with many antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, PCB Antennas, FPC Antennas, Spring Antennas, etc.

NB-IoT Antenna SMA, Omni NB-IoT antenna, NB-IoT PCB antenna, NB-IoT flex antenna, NB-IoT internal antenna, and NB-IoT external antenna are available at C&T RF Antennas Inc.

Contact us for the SMA NB-IoT Antenna 3dBi Antenna date sheet, SMA NB-IoT Antenna 3dBi Antenna price, and SMA NB-IoT Antenna 3dBi Antenna inventory.

SMA NB-IoT Antenna 3dBi Antenna Specifications

SMA NB-IoT Antenna 3dBi Antenna Features