Description
What is RF Power Amplifier Module?
The RF Power Amplifier Module CTRF-ANTENNA-AMP-PA-1550-1610-30W RF Amplifier is a class A amplifier 1.5GHz power amplifier with a 1550-1610MHz frequency 30W power amplifier GPS amplifier GNSS amplifier supplied by C&T RF Antennas Inc.
1.5 GHz RF Power Amplifier Module GPS Amplifier is supplied by C&T RF Antennas Inc, we provide RF products with RF antennas, Antenna Accessories, Amplifiers, And Repeaters.
C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.
C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.
C&T RF Antennas Inc Offers Inventory, Pricing, & Datasheets For RF Power Amplifier Modules or amplifier design.
1.5 GHz RF Power Amplifier Module GPS Amplifier Module Specifications:
| Model | CTRF-ANTENNA-AMP-PA-1550-1610-30W |
| Frequency(MHz) | 1550-1610 |
| Input Power | ≤5dBm |
| Output Power(W) | 45±1dBm(30W ) |
| ALC Range(dB) | ≥25 |
| In-Band ripple(dB) | ≤2 |
| Gain(dB) | 50 or Customized |
| Gain Adjustment Range(dB) | >31/1dB step or Customized |
| Gain Adjustment Linearity(dB) | ≤±1 |
| Gain Flatness(dB) | ±0.5(Max) |
| Impedance(ohm) | 50 |
| VSWR | ≤1.4:1 |
| Voltage(V) | DC+28 |
| Power Current | ≤4.5A |
| RF Connector | SMA-50K or other Customized |
| Monitor interface | RS-485 or RS232 or other Customized |
| Monitoring communication protocols | Use the Manufacturer’s protocol or Customized |
| Working Temperature | -40~+65 degree |
| Storage Temperature | -55 to +85 degree |
| Operating Humidity | 0 to 90%, relative |
| Surface Color | Metal color conductive oxide and other color customized |
| weight | ≤1KG |
| Remark | Module with output short circuit or open circuit protection |
1.5 GHz RF Power Amplifier Module GPS Amplifier Monitoring Function Description：
| No. | Monitoring function | Description | |
| 1 | query | PA ALARM | When an alarm amplifier failure |
| 2 | SWR ALARM | Amplifier output reflection is too large, VSWR exceeds3:1, an alarm is generated | |
| 3 | Over-temperature alarm | Module internal temperature exceeds85 ℃ generates an alarm and turns off the amplifier until the temperature returns tobelow65 ℃,re-open the amplifier | |
| 4 | Over-output power alarm | When the output power exceeds the nominal full power2dBisan alarm | |
| 5 | Input power detection | Accuracy of± 1dB | |
| 6 | Reverse power detection | Accuracy of± 1dB | |
| 7 | Output power detection | Detecting the actual output power amplifier，Accuracy of± 1dB | |
| 8 | Temperature detection | Detection module operating temperature, detection range: -25 ~ +90 ℃, Accuracy of± 3 ℃ | |
| 10 | SWR | Detecting amplifier output port VSWR range of 1.2~ 4.0 | |
| 11 | query and set | PA attenuator Set and query | Set and query the value of ATT |
| 12 | PA switching query and set | Query and set the state open tube amplifier | |
RF Power Amplifier Module
An RF Power Amplifier Module is a device that can amplify the voltage or power of the input signal.
It is composed of electron tubes or transistors, power transformers, and other electrical components. Used in communication, broadcasting, radar, television, automatic control, and other devices.
RF Power Amplifier Module Introduction
A device that increases signal amplitude or power. It is an important component of signal processing in automated technical tools.
The amplifying function of the amplifier is realized by using the input signal to control the energy, and the power consumption required for the amplification is provided by the energy. For linear amplifiers, the output is the reproduction and enhancement of the input signal.
For non-linear amplifiers, the output is a certain function of the input signal.
Amplifiers are classified into mechanical amplifiers, electromechanical amplifiers, electronic amplifiers, hydraulic amplifiers, and pneumatic amplifiers according to the physical quantities of the processed signals. Among them, electronic amplifiers are the most widely used.
With the promotion of jet technology, the application of hydraulic or pneumatic amplifiers has gradually increased.
Electronic RF Power Amplifier Module Types
Electronic amplifiers are divided into vacuum tube amplifiers, transistor amplifiers, solid amplifiers, and magnetic amplifiers according to the active devices used. Among them, transistor amplifiers are the most widely used.
Transistor amplifiers are often used for signal voltage amplification and current amplification in automation instruments, and the main forms are single-ended amplification and push-pull amplification.
In addition, it is often used for impedance matching, isolation, current-voltage conversion, charge-voltage conversion (such as charge amplifiers), and the use of amplifiers to achieve a certain functional relationship between output and input (such as operational amplifiers).
Reviews
There are no reviews yet.