Description
What is an RF Amplifier UHF 300-500MHz 150Watts RF Power Amplifier?
RF Amplifier UHF Amplifier Description:
The RF Amplifier UHF CTRF-ANTENNA-AMP-AP-300-500-150W Amplifier model 300-500MHz 150Watts RF Power Amplifier is an extra-wide band power amplifier UHF with 300-500Mhz and 150 watts output RF Amplifier UHF Amplifier supplied by C&T RF Antennas Inc.
C&T RF Antennas Inc. provides RF products with RF antennas, Antenna Accessories, Amplifiers, And Repeaters.
C&T RF Antennas Inc. provides the RF antenna with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc.
With the radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.
Contact the C&T RF team for more RF Amplifier UHF Amplifier details.
The goal and purpose of RF distribution amplifiers are to increase the strength of received signals to a level that is greater than the signal losses associated with the distribution system.
Simply put, it is used to distribute TV (or other) signals to multiple locations.
To ensure all your devices receive proper strength signals, it’s important that RF distribution amplifiers be centrally located (relative to distribution lines), since the longer the lines, the more signal loss there will be within the system.
There are many different types of RF distribution amplifiers. Some amplify off-air broadcast channels and others amplify off-air and cable channels. Whatever your needs are, C&T RF Antennas Inc. has an RF amp for you!
RF Amplifier UHF Amplifier Is Available At C&T RF Antennas Inc. We Offer RF Amplifier UHF Amplifier Inventory, RF Amplifier UHF Amplifier Pricing, & RF Amplifier UHF Amplifier Datasheets.
Contact us for more details on the RF Amplifier UHF 300-500MHz 150Watts RF Power Amplifier.
RF Amplifier UHF 300-500MHz 150Watts RF Power Amplifier Technical Specifications:
| Frequency(MHz) | 300-500 |
| Output Power(dBm) | 52±1(150watts) |
| Max input power | 15dBm |
| ALC Range(dB) | ≥25 |
| Gain(dB) | 55±1 |
| Gain Adjustment Range(dB) | >30/1dB step or Customized |
| Gain Adjustment Linearity(dB) | ≤±1 |
| Impedance(ohm) | 50 |
| VSWR | ≤1.5:1 |
| Voltage(V) | DC+28-32V |
| Power Current | ≤11A |
| RF Connector | SMA-50K or other Customized |
| RF monitor(MON） | Output signal detection port, the test value=actual power-50db |
| Working Temperature | -20~+55 degree |
| Operating Humidity | 0 to 90%, relative |
| weight | ≤1.5KG |
| Surface Color | Metal color conductive oxide and other colors customized |
| Switch | Turn off at input power ≤-45dBm |
Led status
| LED1 | OFF | PA works normally. |
| Light | ALC>1 | |
| LED2
LED3
|
LED2 light on and off each 1second and LED3 Light | PA works normally.
|
| LED2 off and LED3Light | The PA works normally, but no input signal or input signal is less than -45dbm. | |
| LED2 Fast Flash and LED3 Light | Input buffer (digital attenuator slowly decreases). | |
| LED2 light on and off each 1second and LED3 off | The PA powers off due to over-temperature, and automatically restart when the temperature drops to 55 degrees | |
| LED2 light on and off each 0.5second and LED3 off | Wait for restart (PA will wait for 3min,5min,10min,10min,20min when PA power off due to Over current, overvoltage, overpowering or VSWR, then automatically restart after PA ) | |
| LED2 light and LED3 Light | It restarts successfully but no input signal after module protection | |
| LED2 light and LED3 off | Restart failure (if 5 times cannot restart successfully and prompt failure, it needs manual exclusion). |
C&T RF Antennas Inc. offers RF amplifiers with a variety of gain, noise figures, and linearity features, in either differential or single-ended input impedances.
The products enable high-output IP3 with very low current consumption – setting them apart from simple gain block amplifiers.
Reviews
There are no reviews yet.