Description
What is a 2.6 GHz 50-Watt LTE Power Amplifier?
This RF Amplifier 2.6 GHz 50-Watt LTE Power Amplifier CTRF-ANTENNA-AMP-AP-2620-2690-50W linear high power amplifier was supplied by C&T RF Antennas Inc for producing high-frequency energy for LTE applications.
Leveraging the latest GaN technology and market-leading design miniaturization techniques, C&T RF Power Amplifier modules are designed to meet the demanding needs of aerospace, defense, and industrial markets.
The C&T RF series of solid-state RF & Microwave power amplifiers are ideal for extending your communication range, with off-the-shelf modules that cover VHF, UHF, L-, S-, and C-Band frequencies with up to 100 Watts of RF output power.
Ideal for size, weight, and power-constrained telemetry, Intelligence, Surveillance and Reconnaissance (ISR), and tactical communication systems applications.
Ready to integrate with your communications link: +0 dBm (1 mW) or +30 dBm (1 W) input drive levels, power supply voltages from +11 to +32 VDC, and interchangeable connector types.
Modules are usually smaller and are usually part of systems. You supply your own DC voltage, make the connections, and supply your own DC supply. Modules are available with or without heatsinks and fans.
Amplifier modules are available in both Broadband and Band-Specific frequencies. Modular design concepts save time and money and are lightweight, reliable, cost-effective solutions.
C&T RF Antennas Inc. is well-known in the industry for successfully adapting our amplifiers or custom-designing new solutions to suit each unique project. Please refer to our Adapted & Custom Design Solutions link to begin formulating your performance objectives and other criteria.
C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.
C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.
2.6 GHz 50-Watt LTE Power Amplifier Specifications:
| Frequency(MHz) | 2620-2690 or Customized |
| Output Power(W) | 47±1(50W ) |
| ALC Range(dB) | ≥25 |
| Gain(dB) | 50 or Customized |
| Gain Adjustment Range(dB) | >30/1dB step or Customized |
| Gain Adjustment Linearity(dB) | ≤±1 |
| Gain Flatness(dB) | ±0.5(Max) |
| Impedance(ohm) | 50 |
| VSWR | ≤1.4:1 |
| Voltage(V) | DC+28 |
| Power Current | ≤5.5A |
| RF Connector | SMA-50K or other Customized |
| Monitor interface | RS-485 or RS232 or other Customized |
| Monitoring communication protocols | Use the Manufacturer’s protocol or Customized |
| Working Temperature | -40~+65 degree |
| Storage Temperature | -55 to +85 degree |
| Operating Humidity | 0 to 90%, relative |
| weight | ≤1.5KG |
| Surface Color | Metal color conductive oxide and other colors customized |
| Remark | Module with output short circuit or open circuit protection |
2.6 GHz 50-Watt LTE Power Amplifier Monitoring Function Description:
| No. | Monitoring function | Description | |
| 1 | query | PA ALARM | When an alarm amplifier failure |
| 2 | SWR ALARM | Amplifier output reflection is too large, VSWR exceeds3:1, an alarm is generated | |
| 3 | Over-temperature alarm | Module internal temperature exceeds 85 ºC, generates an alarm and turn off the amplifier until the temperature returns to below 65 ºC, re-open the amplifier | |
| 4 | Over-output power alarm | When the output power exceeds the nominal full power is an alarm | |
| 5 | Input power detection | Accuracy of ± 1dB | |
| 6 | Reverse power detection | Accuracy of ± 1dB | |
| 7 | output power detection | Detecting the actual output power amplifier, Accuracy of ± 1dB | |
| 8 | Temperature detection | Detection module operating temperature, detection range: -25 ~ +90 ºC, Accuracy of ± 3 ºC | |
| 9 | SWR | Detecting amplifier output port VSWR range of 1.2 ~ 4.0 | |
| 10 | query and set | PA attenuator Set and query | Set and query the value of ATT |
| 11 | PA switching query and set | Query and set the state open tube amplifier | |
RF Amplifier 2.6 GHz 50-Watt LTE Power Amplifier is supplied by C&T RF Antennas Inc., we provide RF products with RF antennas, Antenna Accessories, Amplifiers, And Repeaters.
We Offer Inventory, Pricing, and datasheets For The LTE Power Amplifier and other RF Amplifiers.
Contact us for the 2.6 GHz 50-Watt LTE Power Amplifier price, 2.6 GHz 50-Watt LTE Power Amplifier specification, and 2.6 GHz 50-Watt LTE Power Amplifier datasheet.
Reviews
There are no reviews yet.