Description
What is a Low Noise Amplifier Bi-directional Lora Amplifier?
The Low Noise Amplifier Bi-directional Lora Amplifier model CTRF-AMP-868-915-694221-1W RF amplifier is an 868/915 MHz LNA Amplifier Ultra Low Noise Amplifier Bidirectional RF Amplifier supplied by C&T RF Antennas Inc.
We also have a Lora amplifier BDA Bidirectional Amplifier 868MHz LNA Amplifier, 915 MHz Bi-directional Amplifier BDA Amplifier with the same size as your choice.
NOTE: This LNA amplifier requires the device itself to have a TEE function (bias supply), or you need to buy a bias tee to work with it together!
If your device is without a bias tee, please look at this one: 31dB High Gain LNA Low Noise Amplifier For LoRa Applications for your choice.
Rora signal booster, bi-directional amplifier, signal amplifier Product advantages:
Large EU/US market, small size saves logistics costs. Easy to install!
Rora signal booster, bi-directional amplifier, signal amplifier Product Description:
EU-specific operating frequencies of 865-870 MHz with TX & RX attached. 902-920MHz will be available for the US. The built-in filter can avoid interference of out-of-band signals.
What is A low-noise amplifier?
A low-noise amplifier (LNA) is an electronic amplifier that amplifies a very low-power signal without significantly degrading its signal-to-noise ratio.
What is the purpose of a low noise amplifier?
A low-noise amplifier (LNA) is commonly found in all receivers. Its role is to boost the received signal to a sufficient level above the noise floor so that it can be used for additional processing.
The noise figure of the LNA therefore directly limits the sensitivity of the receiver.
Where are low-noise amplifiers used?
Low-noise amplifiers are used in communications receivers such as in cellular telephones, GPS receivers, wireless LANs (Wifi), Lora, and satellite communications.
The Low Noise Amplifier Bi-directional Lora Amplifier is available at C&T RF Antennas Inc, the power amplifier and repeater supplier and RF antenna manufacturer in China.
C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.
C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.
Contact us for more details on the Low Noise Amplifier Bi-directional Lora Amplifier such as the LNA amplifier drawing, amplifier price, amplifier inventory, or other frequency amplifiers.
Low Noise Amplifier Bi-directional Lora Amplifier Specifications
| Item Number | CTRF-AMP-868-915-694221-1W |
| Frequency Range | 868/915 MHz |
| Rx gain | 10dB, Compatible 17dB in design |
| Rx Noise Figure | ≤1.0dB |
| Tx pass-through loss | ≤1.5dB |
| Tx power | ≤20dBm |
| RX to TX switching time | ≤1ms |
| RX TX Switching mode | Level detection switching |
| Power supply mode | DC feed |
| Power voltage | 8～15V |
| Working current | ≤100mA |
| Working temperature | 0～60℃ |
| Impedance | 50Ω |
| I /O Port | N female for ANT port and N male for RF & DC port |
| Dimensions | 69*42*21.5mm |
| Remark | IP65 Waterproof design |
Low Noise Amplifier Bi-directional Lora Amplifier Front view and back view.
Reviews
There are no reviews yet.