High Gain LTE Antenna 4G Internal Antenna

Description

What is High Gain LTE Antenna 4G Internal Antenna?

The indoor antenna High Gain LTE Antenna CTRF-ANTENNA-FPC-7027-10616-IPEX item is a Flexible Printed Circuit Board Embedded FPC Antenna Designed by C&T RF Antennas Inc for 4G LTE WiFi, GSM, CDMA, UMTS, ISM,  SCADA, Utilities, IoT, NB-IoT, LoRa, LTE-IoT applications.

The High Gain LTE Antenna internal 4G antenna has a 106x16mm flex PCB trace board size, 6dBi/8dBi high-gain, 100mm low loss RG 1.13 antenna extender cable, Ipex U.FL connector, double side self-adhesive sticker mount, for the end-user terminals.

What is LTE QoS EPS system?

EPS system, in order to improve the user experience, reduce the delay in the establishment of the service, the real user “always online”, the introduction of the concept of the default bearer (Default Bearer).

That is, while the user is on, the network attachment, the user establishes a fixed data rate of the default bearer, to ensure its basic business needs, the default bearer is a Non-GBR bearing.

Generally speaking, each PDN connection corresponds to a Default Bearer and an IP Address, only in the UE and PDN both support IPV4, and IPV6 dual-stack, a PDN connection may correspond to two Default Bearer and IP Address, the UE in the validity of this PDN connection will always keep this Default Bearer (is it possible for the IP address to change?).

If the UE has connections to more than one PDN, then the UE can have more than one Default EPS Bearer and IP Address.

The default bearer QoS parameters can be derived from contracted data obtained from the Attributed Subscriber Server (HSS) or these values can be changed through PCRF interaction or based on local configuration.

In order to provide services with different QoS guarantees to UEs with the same IP address, e.g. video calls, mobile TV, etc., one or more Dedicated EPS Bears need to be established between the UE and the PDN.

Other EPS bearers connected to the same PDN are called proprietary bearers, and the operator can, according to the policy defined by PCRF (Policy And Charging Resource Function)

Different data flows are mapped to the corresponding Dedicated EPS Bear, and different QoS mechanisms are applied to different EPS Bears.

The dedicated bearer can be a GBR bearer or a Non-GBR bearer. The creation or modification of a dedicated bearer can only be initiated by the network side, and the bearer QoS parameter values are always assigned by the packet core network.

An EPSBearer goes through different network elements and interfaces, including S5/S8 interface between PGW and SGW, the S1 interface between SGW and eNodeB, and the Uu interface between eNodeB and UE.

EPS Bearer will be mapped to different underlying bearers on each interface, and each network node is responsible for maintaining the identity of the underlying bearer and the binding relationship between them.

The internal High Gain LTE Antenna 4G Internal Antenna is supplied by C&T RF Antennas Inc, the leading internal-external 4G LTE antenna manufacturer in China.

C&T RF Antennas Inc also provides the High gain LTE 4G Antennas with many antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Sector Antennas, Yagi Antennas, etc.

C&T RF Antennas Inc provides RF antennas with other antenna radio frequencies such as 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, Lora, NFC, VHF&UHF, NB-IoT, ADS-B, GSM, Wifi 2.4GHz, 5.8GHz, 2G 3G 4G LTE, GPS, GNSS, 5G NR, UWB, etc.

Contact us for more details on the High Gain LTE Antenna 4G Internal Antenna such as High Gain LTE Antenna 4G antenna datasheet, High Gain LTE Antenna 4G antenna pricing, High Gain LTE Antenna 4G antenna inventory, or other High Gain LTE Antenna 4G antennas.

High Gain LTE Antenna 4G Internal Antenna Specifications:

Internal Antenna FPC Antenna Features

Wireless Antenna Applications