Description
What is a High-performance 5dBi 915MHz Fiberglass Antenna?
The High-performance 5dBi 915MHz Fiberglass Antenna style CTRF-ANTENNA-FRP-0915-20300-NK-G is a Lora external antenna with US915 MHz frequency band glass fiber Lora antenna manufactured by C&T RF Antennas Inc.
The 900 902 928 915 MHz fiberglass antenna can be used for LoRa, LoRaWAN, and ISM applications.
The High-performance 5dBi is suitable for LoRa gateway/mapping/wireless meter reading/radio/communication module.
Besides the High-performance 5dBi 915 MHz fiberglass antenna, C&T RF Antennas Inc also provides the 3dBi 915 MHz fiberglass antenna, 4dBi 915 MHz fiberglass antenna, 5.8dBi 915 MHz fiberglass antenna, 6dBi 915 MHz fiberglass antenna, 8dBi 915 MHz fiberglass antenna, 10dBi 915 MHz fiberglass antenna, 12dBi 915 MHz fiberglass antenna, 15dBi 915 MHz fiberglass antenna, 20dBi 915 MHz fiberglass antenna, etc.
Why are antenna radomes made of fiberglass?
An antenna radome is, as the name suggests, a structure used to protect the antenna system from the external environment. It has good electromagnetic wave penetration characteristics in electrical performance, mechanical performance can withstand the role of the external environment.
Outdoor antennas are usually placed in the open air and are directly attacked by natural storms, snow, sand, and solar radiation, resulting in lower accuracy, shorter life, and poor reliability of the antenna, at this time you need a radome to protect the antenna from external influences.
What kind of environment is the Fiberglass antenna suitable for?
A: Because of the small vertical angle, it can only transmit signals at 6~8 degrees horizontally, therefore, a glass fiber (FRP) antenna is widely used for wireless coverage in plain areas and wireless coverage in the same horizontal position;
If a glass fiber antenna is erected at a higher position, it can only transmit signals to a more distant position, while the near place or the place with a height difference cannot be covered.
What are the advantages of fiberglass antennas? What is the difference between fiberglass and a normal SMA antenna?
Fiberglass antennas are sealed, IP67-rated waterproof, and UV-proof functional. The structure of the fiberglass antenna is a little different from a normal SMA antenna, but the principle is the same.
Why fiberglass antenna radome is used?
The reason why fiberglass antenna radome is used is that the wave transmission rate of fiberglass antenna radome is better than plastic ABS but a bit worse than ASA, and ASA is easy to break and softer, fiberglass antenna radome has strong wave transmission and low dielectric constant of 2.6, so a combination of the above points, the glass fiber material is practical to make the antenna radome.
The Omni Antenna High-performance 5dBi 915MHz Fiberglass Antenna can be chosen with the below antenna accessories.
- Magnetic base mount with SMA male cable extension
- N-type male to SMA male connector cable adapter
- N-type female to SMA male connector cable adapter
- U-clamp
- RF Lightning Arrestors
The High-performance 5dBi 915MHz Fiberglass Antenna long-range Lora Antenna is available at C&T RF Antennas Inc, the Lora Antenna & Lorawan Antenna manufacturer in China.
We provide indoor-outdoor antennas with other antenna radio frequencies such as 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, Lora, VHF&UHF, NB-IoT, GSM, Wifi 2.4GHz, 5.8GHz, 2G 3G 4G LTE, GPS, 5G NR, UWB, etc.
C&T RF Antennas Inc provides the ISM Lora antenna with many antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, PCB Antennas, FPC Antennas, Spring Antennas, etc.
Contact us for more details on the High-performance 5dBi 915MHz Fiberglass Antenna such as the 915MHz Fiberglass Antenna price, 915MHz Fiberglass Antenna datasheet, 915MHz Fiberglass Antenna inventory, or the other Lora antenna & LoraWan antenna types.
High-performance 5dBi 915MHz Fiberglass Antenna Specifications
High-performance 5dBi 915MHz Fiberglass Antenna Electrical Specifications |
|
RF Antenna Type | Omni Fiberglass Antenna |
Model | CTRF-ANTENNA-FRP-0915-20300-NK-G |
Frequency Range | 915MHz |
Gain | 5dBi |
VSWR | ≤1.8 |
Impedance | 50 Ω |
Polarization | Vertical |
Directional | Omni-directional |
Connector | N-type female |
Max Power | 50W |
Lightning Protection | DC-Ground |
High-performance 5dBi 915MHz Fiberglass Antenna Mechanical Specifications |
|
Dimension | 20*300mm |
Weight | Approx. 250g |
Radome Material | Fiberglass |
Operation Temperature | -20˚C ~ +85˚C |
Storage Temperature | -40˚C ~ +85˚C |
Color | Grey |
Antenna Design | Dipole Array |
Mounting | Screw/Pole |
Safety Emission and other | RoHS Compliant |
Applications | Public Safety/LMR/P25/TETRA, ISM/SCADA/Utilities, RFID, IoT/NB-IoT/LoRa, etc. |
Outdoor High-performance 5dBi 915MHz Antenna Fiberglass Antenna Features
High-performance Fiberglass Antenna Applications
Reviews
There are no reviews yet.