50MHz-6GHz High Current Bias Tee SMA

27x27x10mm 50MHz-6GHz High Current Bias Tee SMA Broadband Bias Tee - C&T RF Antennas Inc

High Current Bias Tee Supplier

C&T RF Antennas Inc provides the 50MHz-6GHz High Current Bias Tee SMA Broadband Bias Tee, LNA amplifiers, and power amplifiers with Cellular, Wifi, GSM, LoRa, NB-IoT, GPS, LTE, 5G Amplifiers, etc.

Contact the C&T RF sales team for more 50MHz-6GHz High Current Bias Tee SMA Broadband Bias Tee details.

SKU CTRF-BIAS-T-50600-2727-SMAK Categories ,

Description

What is a 50MHz-6GHz High Current Bias Tee SMA?

The 50MHz-6GHz High Current Bias Tee SMA model CTRF-BIAS-T-50600-2727-SMAK is a Bias Tee SMA Broadband Bias Tee covering 50 MHz to 6GHz ultra-wideband frequency Bias Tee supplied by C&T RF Antennas Inc for Antenna RF feed.

The 50MHz-6GHz High Current Bias Tee SMA Broadband Bias Tee is used in Module testing when connected to the instrument isolation straight [spectrum meter, the signal source can not be directly connected to DC power so need to isolate straight.

Bias Tee DC Side Bias Current

The DC side bias current is the current input from the DC side and passes through the inductor, and is mainly limited by the maximum current that the DC port inductor can withstand.

The higher the value of the DC side bias current represents a better indicator. When the actual current exceeds the upper limit of the bias current, the DC port inductor is in a current saturation state.

The performance of Bias Tee is affected in this state and the device may be damaged due to excessive current, resulting in Bias Tee not operating properly.

Bias Tee RF side and DC side isolation

Isolation refers to the ability of the inductor to prevent the RF signal from the RF port from flowing to the DC port, and the unit is usually expressed in dB. Theoretically, the greater the isolation, the better.

If the isolation index of a Bias Tee is poor, the RF signal will leak into the power supply system and affect the system’s performance.

C&T RF Antennas Inc provides RF power amplifiers, low noise amplifiers LNA amplifiers, Bias Tees, etc.

The 50MHz-6GHz High Current Bias Tee SMA Broadband Bias Tee is available at C&T RF Antennas Inc, the power amplifier and repeater supplier and RF antenna manufacturer in China.

C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC169MHz230MHz315MHz433MHz868MHz915MHzVHF&UHFLoraNB-IoTADS-BGSMGNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTEGPS5G NR, 6G, etc.

C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole AntennasWhip AntennasMarine AntennasRouter AntennasMIMO AntennasCombo AntennasPCB AntennasFPC AntennasSpring AntennasMagnetic AntennasSector AntennasYagi Antennas, and Accessories, etc, for IoT & M2M industries.

Contact us for more details on the 50MHz-6GHz High Current Bias Tee SMA Broadband Bias Tee such as the Broadband Bias Tee drawing, Broadband Bias Tee price, Broadband Bias Tee inventory, or other frequency Bias Tees and LNA Low Noise Amplifiers.

 

50MHz-6GHz High Current Bias Tee SMA Broadband Bias Tee Specifications

Model CTRF-BIAS-T-50600-2727-SMAK
Frequency 50MHz-6GHz
Insertion Loss 0.5dBi or 1.2dB
Normal working current ≤0.31A or≤1.2A
Limit current when feeding 310mA or 1200mA
Power supply mode DC feed
Power voltage 35V(DC)
Weight 30g
Impedance 50Ω
I /O Port Connector SMA female
Dimensions 27x27x10mm
Remark Two options for the working current
50MHz-6GHz High Current Bias Tee SMA Broadband Bias Tee Picture
27x27x10mm 50MHz-6GHz High Current Bias Tee LNA Bias Tees - C&T RF Antennas Inc
27x27x10mm 50MHz-6GHz High Current Bias Tee LNA Bias Tees – C&T RF Antennas Inc

 

Low Noise Amplifier LNA Amplifier With SMA Female Connector - C&T RF Antennas Inc
Low Noise Amplifier LNA Amplifier With SMA Female Connector – C&T RF Antennas Inc

 

Reviews

There are no reviews yet.

Be the first to review “50MHz-6GHz High Current Bias Tee SMA”