Description
What is a 1.6-1.8 GHz Amplifier 50 Watt Amplifier?
The 1.6-1.8 GHz Amplifier 50 watt amplifier CTRF-ANTENNA-AMP-PA-1618-50W comes with a 1600-1800MHz 1.8GHz power amplifier. It is supplied by C&T RF Antennas Inc, we provide many different types of power amplifiers, different outpowers, and different frequency bands.
1.6-1.8 GHz Amplifier 50Watt Amplifier is supplied by C&T RF Antennas Inc, we provide RF products with RF antennas, Antenna Accessories, Amplifiers, And Repeaters.
C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.
C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.
Contact us for the 1.6-1.8 GHz Amplifier 50Watt Amplifier datasheet, 1.6-1.8 GHz Amplifier 50Watt Amplifier pricing, 1.6-1.8 GHz Amplifier 50Watt Amplifier inventory, or other power amplifier details.
RF Amplifiers
C&T RF Antennas Inc’s RF amplifiers are designed using the company’s leading amplifier and RF IC expertise. The company’s extensive family of single-ended, input/output, fixed-gain amplifiers can be used from low frequencies up to microwave and include gain blocks, low noise amplifiers, intermediate frequency amplifiers, driver amplifiers, and differential amplifiers.
These devices offer high linearity, low noise figures, various fixed-gain options, and low power consumption; they are all fully specified over frequency, temperature, and supply voltage for use in a variety of applications.
Our RF amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.
We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit.
All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM, or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.
These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.
These self-contained , broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely.
1.6-1.8 GHz Amplifier 50 Watt AmplifierTechnical Specifications:
| Model | CTRF-PA-1600-1800-50W |
| Frequency(MHz) | 1600-1800 |
| Input Power | ≤20dBm |
| Output Power(W) | 47±2(50W ) |
| ALC Range(dB) | ≥25 |
| In-Band ripple(dB) | ±3 |
| Gain(dB) | 50 or Customized |
| Gain Adjustment Range(dB) | >31/1dB step or Customized |
| Gain Adjustment Linearity(dB) | ≤±1 |
| Gain Flatness(dB) | ±0.5(Max) |
| Impedance(ohm) | 50 |
| VSWR | ≤1.4:1 |
| Voltage(V) | DC+28 |
| Power current | ≤8.5A |
| RF Connector | SMA-50K or other Customized |
| Monitor interface | RS-485 or RS232 or other Customized |
| Monitoring communication protocols | Use the Manufacturer’s protocol or Customized |
| Working Temperature | -40~+65 degree |
| Storage Temperature | -55 to +85 degree |
| Operating Humidity | 0 to 90%, relative |
| Surface Color | Metal color conductive oxide and other colors customized |
| weight | ≤1.5Kg |
| Remark | Module with output short circuit or open circuit protection |
1.8GHz 50 Watt Amplifier Monitoring Function Description:
| No. | Monitoring function | Description | |
| 1 | query | PA ALARM | When an alarm amplifier failure |
| 2 | SWR ALARM | Amplifier output reflection is too large, VSWR exceeds3:1, an alarm is generated | |
| 3 | Over-temperature alarm | Module internal temperature exceeds85 ℃ generates an alarm and turn off the amplifier until the temperature returns tobelow65 ℃, re-open the amplifier | |
| 4 | Over output power alarm | When the output power exceeds the nominal full power2dBisan alarm | |
| 5 | Input power detection | Accuracy of± 1dB | |
| 6 | Reverse power detection | Accuracy of± 1dB | |
| 7 | Output power detection | Detecting the actual output power amplifier, Accuracy of± 1dB | |
| 8 | Temperature detection | Detection module operating temperature, detection range: -25 ~ +90 ℃, Accuracy of± 3 ℃ | |
| 10 | SWR | Detecting amplifier output port VSWR range of 1.2~ 4.0 | |
| 11 | query and set | PA attenuator Set and query | Set and query the value of ATT |
| 12 | PA switching query and set | Query and set the state open tube amplifier | |
Reviews
There are no reviews yet.