Description
What is a 2.4 GHz Power Amplifier Module Class AB Amplifier?
The 2.4 GHz Power Amplifier Module Class AB Amplifier model CTRF-AMP-2450-15511923-100W RF amplifier is a wifi 2.4 GHz RF Amplifier 100 Watt Amplifier supplied by C&T RF Antennas Inc for wireless Lan applications.
C&T RF Antennas Inc not only provides the 2.4 GHz Power Amplifier Module Class AB Amplifier but also 2.4 GHz Power Amplifier Module Class A Amplifier, 2.4 GHz Power Amplifier Module Class B Amplifier, etc.
What 2.4 GHz Power Amplifier Module is so important?
With the development of 2.4G wireless networks, the number of products and users, the more crowded this communication band, in order to improve spectrum utilization, carrier quadrature amplitude modulation (QAM) and quadrature-phase keying (QPSK) and other linearization modulation techniques are widely used.
Which is the linearity and efficiency of the wireless transmitter system requirements are also increasingly high. The quality of the power amplifier peripheral circuit network is particularly important.
With the development of the design and manufacturing process, the quality of the peripheral auxiliary circuit network of the 2.4GHz power amplifier is especially important.
The stability of power supply, high efficiency, low noise output, filtering circuit, impedance matching circuit, and the design of microstrip line in actual production will affect the complete low interference transmission of the signal.
In addition, the integrated circuit and PCB once completed ‘in the actual assembly and production of its own impossible to make changes, but as peripheral auxiliary parts, RLC and other parts can easily do the corresponding adjustments in the spectrum flatness, EVM, and other aspects to achieve the purpose of optimization.
Especially in the field of RF, for the product assembly and production from all aspects of the impact of factors, many of which can not be measured and predicted, the actual measurement of the adjustment of peripheral circuit parameters, has been an indispensable part of the design process.
The output spectrum flatness is directly affected by the performance of the communication channel. For the channel power flatness limit standard, the power of each subcarrier should be between the standard.
And if the power of the subcarriers is too different, the power spectrum is not flat will affect the connection performance. In-band spectrum is not flat, ripple changes a lot, resulting in the fluctuation of the output power, which will accordingly cause instability of the entire RF transmission system.
The causes of the spectrum flatness are a variety of reasons, all levels of parts impedance mismatch signal reflection, the flatness of the parts themselves, from the clock signal multiplier interference, power interference, etc., may affect the output spectrum flatness of good or bad.
Through theoretical derivation and application analysis of 2.4G PA peripheral lines, we summarize the impact of all aspects on the output spectrum flatness and test the improvement of engineering examples to provide the basis for future wireless network design.
For the 2.4 GHz Power Amplifier Module Class AB Amplifier same size, C&T RF Antennas Inc provides the other frequency bands power amplifiers.
Such as VHF UHF power amplifier, 433 Mhz amplifier, 1240-1300 MHz amplifier, 868Mhz amplifier, 915 Mhz amplifier, 5.8 GHz amplifier, 3.5 GHz amplifier, GSM amplifier, LTE amplifier, Lora amplifier, 5G NR amplifier, etc.
C&T RF Antennas Inc provides the RF power amplifier types with the below watts:
50 Watt amplifiers
60 Watt amplifiers
70 Watt amplifiers
80 Watt amplifiers
90 Watt amplifiers
100 Watt amplifiers
150 Watt amplifiers
200 Watt amplifiers
250 Watt amplifiers
300 Watt amplifiers
350 Watt amplifiers
400 Watt amplifiers
450 Watt amplifiers
500 Watt amplifiers
550 Watt amplifiers
600 Watt amplifiers
700 Watt amplifiers
800 Watt amplifiers
900 Watt amplifiers
1000 Watt amplifiers
The 2.4 GHz Power Amplifier Module Class AB Amplifier is available at C&T RF Antennas Inc, the power amplifier and repeater supplier and RF antenna manufacturer in China.
C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.
C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.
Contact us for more details on the 2.4 GHz Power Amplifier Module Class AB Amplifier such as the 2.4 GHz Power Amplifier Module drawing, 2.4 GHz Power Amplifier Module price, 2.4 GHz Power Amplifier Module inventory, or other frequency Class AB Amplifiers.
2.4 GHz Power Amplifier Module Class AB Amplifier Specifications
2.4 GHz Power Amplifier Module Class AB Amplifier Technical Specifications:
Model | CTRF-AMP-2450-15511923-100W |
Frequency(MHz) | 2400-2500 |
Input Power | ≤20dBm |
Output Power(W) | 100±1(100W ) |
ALC Range(dB) | ≥25 |
In-Band ripple(dB) | ≤3 |
Gain(dB) | 50 or Customized |
Gain Adjustment Range(dB) | >31/1dB step or Customized |
Gain Adjustment Linearity(dB) | ≤±1 |
Gain Flatness(dB) | ±0.5(Max) |
Impedance(ohm) | 50 |
VSWR | ≤1.4:1 |
Voltage(V) | DC+28 |
Power Current | ≤6.5A |
RF Connector | SMA-50K or other Customized |
Monitor interface | RS-485 or RS232 or other Customized |
Monitoring communication protocols | Use the Manufacturer’s protocol or Customized |
Working Temperature | -40~+65 degree |
Storage Temperature | -55 to +85 degree |
Operating Humidity | 0 to 90%, relative |
Surface Color | Metal color conductive oxide and other colors customized |
weight | ≤1.2KG |
Remark | Module with output short circuit or open circuit protection |
2.4 GHz Power Amplifier Module Class AB Amplifier Monitoring Function Description:
SN | PIN | Function | Description |
1 | 485B | monitor interface | Support to query working status and monitor PA by RS485 |
2 | 485A | ||
3 | SWR | VSWR Alarm | If VSWR exceeds 4:1, an alarm is generated and PA will off |
4 | TEMP | Temperature alarm | Module case temperature exceeds 75 ℃, generates an alarm and reaches 85℃, turn off the amplifier, until the temperature returns to below 65 ℃, and re-open PA.
when generating an alarm, the output TTL level is 3.3v.and when it is working normally, the level is 0v |
5 | V+ | Forward power detection | Detecting the actual output power, It is linear with output power |
6 | V- | Reverse power detection | Detecting the actual output power, It is linear with reverse power. |
7 | PTT | Enable | PA ON when PTT is Low level or no level (ground) and PA OFF when PTT is High level (+5V), pulled up with 10kΩ. |
8 | Vt | PA temperature, | Vt=0.5V+TC×10mV/℃ |
9 | GND | grounding |
Reviews
There are no reviews yet.