Description
What is the 1.1-1.6 GHz GNSS LNA Low Noise Amplifier?
The 1.1-1.6 GHz GNSS LNA Low Noise Amplifier model CTRF-LNA-AMP-110160-3522-SMA-K RF is a high-gain, low-noise amplifier (LNA) designed for GPS, Galileo, and GLONASS applications LNA Amplifier supplied by C&T RF Antennas Inc.
GNSS LNA Amplifier Low Noise Amplifier Product Features
The LNA amplifier has a wide frequency range, stable gain, small noise coefficient, dynamic range (+20dBm@1dBP), and other advantages, especially suitable for a variety of satellite positioning systems receiving front-end circuits to improve the reception sensitivity.
GNSS LNA Amplifier Low Noise Amplifier Product Applications
BeiDou BD GPS Low Noise Amplifier 1575 1561 1.6 1.2 LNA 1.1-1.6GHz LNA In Satellite Communication.
The GNSS LNA Amplifier is Widely used in Beidou BD, GPS, GLONASS, and Galileo satellite navigation systems. As well as other RF front-end and other places that require low-noise small-signal RF amplification!
In the case of amplifying weak signals, the amplifier’s own noise may interfere with the signal severely, so it is desirable to reduce this noise to improve the signal-to-noise ratio of the output.
The degree of signal-to-noise ratio deterioration caused by the amplifier is usually expressed in terms of the noise factor F (see Amplification) or by taking the logarithmic value of the noise factor FN = 10lgF(dB)
The noise factor of an ideal amplifier is F=1 (0 dB), and its physical meaning is that the output signal-to-noise ratio is equal to the input signal-to-noise ratio. The FN of a well-designed low-noise amplifier can be 3 dB or less.
In the case of a very low noise factor, the noise temperature Te is usually used as a measure of amplifier noise performance: Te=T0(F-1).
where T0 is the room temperature. Here, both it and the noise temperature Te are in Kelvin (K).
C&T RF Antennas Inc provides RF power amplifiers, low noise amplifiers LNA amplifiers, Bias Tees, etc.
The 1.1-1.6 GHz GNSS LNA Low Noise Amplifier is available at C&T RF Antennas Inc, the power amplifier and repeater supplier and RF antennas manufacturer in China.
C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.
C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.
Contact us for more details on the 1.1-1.6 GHz GNSS LNA Low Noise Amplifier such as the GNSS LNA Amplifier drawing, GNSS LNA Amplifier price, GNSS LNA Amplifier inventory, or other frequency LNA Low Noise Amplifiers.
1.1-1.6 GHz GNSS LNA Low Noise Amplifier Specifications
| Model | CTRF-LNA-AMP-110160-3522-SMA-K |
| Frequency | 1.1 GHz-1.6 GHz |
| Amplification gain | 30dB |
| Noise Figure | 1.0dB |
| Maximum output power | + 20dBm (100MW) @ 1DB compression point |
| Power supply voltage | 5.0V |
| Amplifier gain | F = 1.100GHz GAIN = 31dB
F = 1.268GHz GAIN = 31dB F = 1.561GHz GAIN = 30.2dB F = 1.575GHz GAIN = 30.2dB F = 1.616GHz GAIN = 30dB |
| Weight | 22g |
| Work current | 155mA (5V) |
| Impedance | 50Ω |
| I /O Port Connector | SMA female |
| Dimensions | 35*22*11mm |
| Applications | BD, GPS, GNSS, Gloness, RF front end, etc |
1.1-1.6 GHz GNSS LNA Low Noise Amplifier Picture
Reviews
There are no reviews yet.