Description
What is a 50MHz-4G 5G LTE LNA Very Low Noise Amplifier?
The 50MHz-4G 5G LTE LNA Very Low Noise Amplifier model CTRF-LNA-AMP-50400-4232-SMA-K RF LNA amplifier is a 50MHz – 4GHz frequency Broadband Low Noise Amplifier 4G 5G LTE LNA Low Noise Amplifier supplied by C&T RF Antennas Inc.
The CTRF-LNA-AMP-50400-4232-SMA-K LNA amplifier is a high-performance pHEMT MMIC LNA designed for operation from 50MHz to 4000MHz Ultra-low noise NF=0.6dB High linearity 0.05-4G wideband amplification LTE LNA input down to -110dBm.
The on-chip active bias network provides stable current over temperature and process threshold voltage variations.
The CTRF-LNA-AMP-50400-4232-SMA-K LNA amplifier provides an ultra-low noise figure and high linearity performance in a gain block configuration.
Its single-supply operation and integrated matching network make implementation very simple.
The maximum input power specification makes it ideal for high dynamic range receivers.
LNA amplifier Module Features
Ultra-low noise at 900MHzFigure=0.60dB
High linearity: OIP3 at 1960MHz = 39.5dBm
P1dB= 22.7dBm at 1960MHz
Ultra-low noise Figure=0.60dB at 900MHz
Single supply operation : 5V at IDQ=90mA
Wideband Internal Matching
The noise figure of transistor amplifiers is largely independent of the circuit configuration.
However, the common-emitter amplifier has a moderate input resistance, and the optimal source resistance Rs when F is minimum is relatively close to this input resistance, and the input circuit is roughly matched with a large gain.
The input resistance of the common base amplifier is small, and the input impedance of the common-collector amplifier is high.
Both of them are not easy to meet the conditions of small noise coefficient and high amplifier gain at the same time, so they are not very suitable for the preamplifier key.
In order to take into account the requirements of low noise and high gain, the common-emitter-common base cascade is often used for low-noise amplification circuits.
C&T RF Antennas Inc provides RF power amplifiers, low noise amplifiers LNA amplifiers, Bias Tees, etc.
The 50MHz-4G 5G LTE LNA Very Low Noise Amplifier is available at C&T RF Antennas Inc, the power amplifier and repeater supplier and RF antennas manufacturer in China.
C&T RF Antennas Inc provides internal & external antennas with antenna radio frequencies such as NFC, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, VHF&UHF, Lora, NB-IoT, ADS-B, GSM, GNSS, GPRS, 1.2 GHz, 1.4 GHz, 1.8 GHz, Wi-Fi 2.4 GHz, 5.8 GHz, Cellular 2G, 3G, 3.5 GHz, 4G LTE, GPS, 5G NR, 6G, etc.
C&T RF Antennas Inc. provides RF antennae with Omni & Directional antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Magnetic Antennas, Sector Antennas, Yagi Antennas, and Accessories, etc, for IoT & M2M industries.
Contact us for more details on the 50MHz-4G 5G LTE LNA Very Low Noise Amplifier such as the LTE LNA Very Low Noise Amplifier drawing, LTE LNA Very Low Noise Amplifier price, LTE LNA Very Low Noise Amplifier inventory, or other frequency LNA Low Noise Amplifiers.
50MHz-4G 5G LTE LNA Very Low Noise Amplifier Specifications
| Model | CTRF-LNA-AMP-50400-4232-SMA-K |
| Frequency | 50MHz -4GHz |
| Amplification gain | 18dB@0.9GHz |
| Noise Figure | 0.6dB @0.9GHz, 0.8dB @1.96GHz |
| Input Signal Power | 27dBm ( MAX ) |
| Maximum output power | P1dB: +22dBm@2GHz |
| Working current | 75–90mA |
| Power supply voltage | 5.0V |
| Input signal | <+ 10dB (input can be as low as -110dB)
>+ 10dB input with complete output signal distortion |
| Working voltage | 3-5V |
| Impedance | 50Ω |
| I /O Port Connector | SMA female |
| Operating Temperature Range | -40C~ +85*C |
| Weight | 36.3g |
| Dimensions | 42x32x12mm |
| Applications | Lora, ISM, Cellular 3G, 4G, LTE, NB-IoT, GSM, PCS, WCDMA, WiMAX, etc |
50MHz-4G LTE LNA Very Low Noise Amplifier Picture
Reviews
There are no reviews yet.