Description
What is a High-gain 4G Network Receiver Flexible PCB Antenna?
The High-performance 4G Network Receiver Flexible PCB antenna CTRF-ANTENNA-FPC-7027-10316-IPEX antenna model flex PCB antenna comes with a large flexible circuit board size 103x16mm, 6dBi/8dBi high-gain, and high-performance for the 4G network receiving Ipex antenna manufactured by C&T RF Antennas Inc.
What do I need to focus on for LTE single-station verification and testing?
Access, upload, download, and coverage; checking PCI, TAC, and verifying that co-station neighbors are added.
Inspection of site installation problems (antenna feed connection reversal, transmission connection reversal, blocking, etc.).
LTE test is mainly concerned with PCI (identification code of the cell), RSRP (average power of the reference signal, indicating the good or bad cell signal coverage, role:
Selection and reselection of the main cell, power control), SINR: signal to interference plus noise ratio (response signal quality, SINR value has a greater impact on the throughput.
Role: used for power control, and feedback on signal quality, when the signal quality is greater than the large threshold, and the signal strength is greater than the small threshold then drop 1DB power;
When the signal strength is greater than the large threshold, and the signal quality is greater than the small threshold then drop 1DB power;
When the signal strength is less than the small threshold, or the signal quality is less than the small threshold, then add 1, 3DB power),
RSSI (Received Signal Strength Indicator, refers to the total power received by phone, including useful signal, interference, and bottom noise),
PUSCH Power (UE’s transmitting power), transmission mode (TM3 is dual-stream mode), Throughput DL, Throughput UL upstream and downstream rate, drop rate, connection success rate, switching power.
RSRQ (mainly used for switching, which reflects the load of the cell).
The internal Antenna 4G Network Receiver Flexible PCB Antenna is supplied by C&T RF Antennas Inc, the leading internal-external 4G LTE antenna manufacturer, we provide the 3G 4G LTE Antennas with other antenna types such as Dipole Antennas, Whip Antennas, Marine Antennas, Router Antennas, MIMO Antennas, Combo Antennas, PCB Antennas, FPC Antennas, Spring Antennas, Sector Antennas, Yagi Antennas, etc.
C&T RF Antennas Inc provides RF antennas with other antenna radio frequencies such as 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz, Lora, NFC, VHF&UHF, NB-IoT, ADS-B, GSM, Wifi 2.4GHz, 5.8GHz, 2G 3G 4G LTE, GPS, GNSS, 5G NR, UWB, etc.
The High-gain 4G Network Receiver Flexible PCB Antenna is available at C&T RF Antennas Inc, Contact us for the 4G Network Receiver Flexible PCB Antenna datasheet, 4G Network Receiver Flexible PCB Antenna pricing, and 4G Network Receiver Flexible PCB Antenna inventory, or other 4G LTE Antenna.
High-performance 4G Network Receiver Flexible PCB Antenna Specifications
| High-gain 4G Network Receiver Flexible PCB Antenna Electrical Specifications | |
| RF Antenna Type | Embedded FPC Antenna |
| Model | CTRF-ANTENNA-FPC-7027-10316-IPEX |
| Frequency | 700-960MHz, 1710-2700MHz |
| Gain | 6dBi/8dBi |
| VSWR | ≤2.0 |
| Impedance | 50 Ω |
| Polarization | Vertical Polarization |
| Cable Type | RG1.13 |
| Connector | U.FL/IPEX |
| Cable Length | 100mm |
| Lightning Protection | DC-Ground |
| High-gain 4G Network Receiver Flexible PCB Antenna Mechanical Specifications | |
| FPC Board Dimension | 95x24mm |
| Weight | Approx. 5g |
| Material | FPCB + RG Cable + U.FL connector |
| Operation Temperature | -40˚C~+85˚C |
| Storage Temperature | -40˚C~+80˚C |
| Color | Black |
| Antenna Design | Dipole Array |
| Mounting | Connector/Sticker |
| Safety Emission and other | RoHS Compliant |
| Applications | ISM/SCADA/Utilities, IoT/M2M/NB-IoT/LoRa, 2G 3G 4G LTE/LTE-IoT/LTE-M/LTE-Cat, GSM GPRS UMTS PCS, etc. |
High-performance Bulti-in Antenna FPC Antenna Features
High-performance 4G Network Receiver Flexible PCB Antenna Applications
Reviews
There are no reviews yet.