Balun 1:1 3000 W PEP SSB



The balun transformer is wound on a ferite toroid core. This antenna balun is placed in a waterproof box with  IP65. A brand name SO239 connector is used, made by AMPHENOL, type U655A1A – NTT 50. Transformation ratio: 1:1, maximum power load: 3000W PEP SSB

More details

85,00 €

85,00 € per ks

Data sheet

Frequency range1,8 Mhz – 30 Mhz
Maximum power load3000 W PEP SSB
Weight616 g
Model nameBALUN
Transformation ratio1:1
Standing Wave Rationot worse than 1,3
Used fordipoles and other wire antennas

More info

This antenna balun is placed in a waterproof box with  IP65 made by SCAME, type 686.205.

On both sides of the box are screws with closed hook ends  for mechanical attachement of the dipole wire arms, the screws are of size M5, made from anticorrosion steel for long lasting mechanical loads. A brand name SO239 connector is used, made by AMPHENOL, type U655A1A – NTT 50, bolted to the box via anticorrosion steel screws and nuts.

The balun transformer is wound on a ferite toroid core with the respective measurments of (outer x inner x height) 63 x 38 x25 mm.

The arms of the dipole are electrically conected to the transformer thru a pair of M4 screws and nuts  on both sides of the box



The connector on the antenna serves only to electrically connect with the coaxial cable. For bearing the coaxial cable and suspension of the balun box, use the attached   rope. (with inner core made by LANEX).


The warranty does not cover damage made by overloading the balun with more power than specified on the balun`s label.